Section 15.2 of tutorial

[Mahdiye Mirzai]

I tried to simulate the example in the Section 15.2 of tutorial , my control file and setup file and station file are shown below:
CONTROL
11 03 14 00
1
37.4206 141.0329 100.0
196
0
10000.0
1
C:/Users/PARSIAN/Desktop/2/
RP201103.bin
1
I131
5.0E+15
24.0
11 03 14 12 00
1
0.0 0.0
1.0 1.0
181.0 360.0
./
fukushima.bin
1
500
00 00 00 00 00
00 00 00 00 00
00 24 00
1
0.0 0.0 0.0
0.01 0.0 0.0 0.0 0.0
3.00 0.0 0.0
8.00
0.0

&SETUP
delt = 30.0,
initd = 0,
numpar = 24000,
maxpar = 25000,
/

DHAK 53.9 -166.5

but con2stn.txt is not the same as the Dutch_Harbor.txt
Please advise me
Thanks

[glenn.rolph]

Make sure you are correctly specifying the concentration multiplier (1000.0) in the time series extraction GUI (attached) as this may default to 1.0E+12.

How different is your graph from the one in the Tutorial? Attach your fukushima1.txt and timeplot.ps if possible.

[Mahdiye Mirzai]

Thanks for your advice

[Mahdiye Mirzai]

Thanks for your advice

[glenn.rolph]

Are you running version 854 of HYSPLIT which was used for this tutorial? You can see the version number in the MESSAGE file. Otherwise, I see no obvious issues.

[Mahdiye Mirzai]

Sorry, I USE version 802 of HYSPLIT

[glenn.rolph]

I suggest you update to the latest version and try again.

[Mahdiye Mirzai]

Thanks a lot.

[Mahdiye Mirzai]

I updated to the latest version and tried again process but I received the previous fukushima1.txt result.

[Mahdiye Mirzai]

I found out that the control files in the tutorial are not true Completely, but by fallowing the steps In the tutorial I made a true control file.